An outdoor heater in a shed is more than just something that’s for heating water and using in the garden. It can also be used to provide light or heat up a cold winter’s night. It’s also perfect for getting your Christmas tree ready in the shed.
Whatever you want to do with your outdoor heater in a shed, you should think about how the heat is going to work. You’ll need to consider what materials you are going to use, if there are going to be any windows, what kind of cover you are going to put over it, whether you want to install a venting system, or a solar panel, and what other things it is going to need to run.
The first thing you need to consider is whether the outdoor heater in a shed you want to install is going to be a wood or gas burner. If you’re putting a wood burner, then you are in all likelihood going to be putting your heat source outside of the structure. Gas is a little more suitable but is still a little bulky, and wood is nice because it is portable and has a slow burn and lasts for a long time. Wood burns for six to eight hours and has the advantage of being easy to maintain, but it’s a lot less efficient than gas when it comes to the amount of heat it generates, so it’s not something you would want to use in an enclosed area.
If you decide to install an outdoor heater in a shed, then you need to know where it is going to be placed. While some people have chosen to put their heat source inside the structure, this isn’t really a good idea. You don’t want to allow yourself to be trapped inside your house while the heater is on. A good placement for the heater is somewhere outside the doors or window frames of the structure.
Wherever you decide to place the heater, then you will want to make sure that you have a good seal on the outside of the structure. This means that if the structure is made of wood, then you will want to paint the surface to prevent it from warping, and a good solution is a dryer sheet for a covering.
When you are installing the heater, you should cover it with newspaper, or put some felt on the interior to use as house blinds. If you are looking to get some extra insulation, then you can use a sheet of plywood to make your own door.
After you have completed the cover you will need to then attach the venting system. This should be a simple process, since you will have to attach it by using either screws or a steel pipe, but you will want to keep in mind that there is going to be more exhaust coming from the heater than there is from the outside.
Once this is done, you will be able to ventilate the structure better, and that will be important if you are using the heater for heating purposes. As well as this, the venting system will allow air to flow freely so you won’t have to worry about the smoke making its way into your house, and that will be important if you are trying to keep your house clean.